In Stock
High Quality Vertical Multitasking Machining Center. Made in Taiwan
STANDARD
| DMT-500 | |
|---|---|
| TRAVEL | |
| X-axis travel (table forw. / fackw.) | 1,000 mm |
| Y-axis travel (spindle head rightw. / leftw.) | 800 mm |
| Z-axis travel (spindle head upw. / downw.) | 950 mm |
| B-axis travel (spindle head tilts) | 150° ( -30° ~ +120° ) |
| C-axis tracel (table rotation) | 360° ( Continuous ) |
| B-axis rotation center to table center | 990 mm |
| (X-axis at home position) | |
| B-axis rotation center to table center (at limit end) | -10 mm |
| spindle nose to table center linr (B-axis at 90°、X-axis at home position) | 675 mm |
| B-axis rotation center to table surface | 150 ~ 1,100 mm |
| Spindle nose to table (B-axis at 0°) | -165 ~ 785 mm |
| CAPACITY | |
| Table diameter | Ø500 mm |
| Max. turning diameter (O.D.) | Ø730 mm |
| Max. workpiece sizes | Ø730 x 950 mm |
| Max. table load | 800 kgf |
| C-AXIS | |
| Max. speed of turning shaft | 600 rpm |
| Rapid traverse | 50 rpm |
| Min. indexing angle | 0.0001° |
| SPINDLE | |
| Max. spindle speed | 12,000 rpm |
| Spindle nose taper | KM63 |
| Spindle speed range | 0 ~ 12,000 rpm |
| B-axis rapid traverse | 50 rpm |
| Min. indexing angle (B-axis) | 0.0001° |
| FEED RATE | |
| X / Y / Z-axis rapid traverse | 30 m/min |
| Tool shank | KM 63 |
| Tool storage capacity | 40 (60) |
| Max. tool diameter / length / weight | Ø100 mm / 300 mm / 7kgf |
| Max. tool diameter (no adjacent tool) | Ø130 mm |
| Tool selection | Random |
| Tool change time (chip to chip) | 3 sec |
| MOTORS | |
| Spindle motor (cont. / 30min) | 11 / 15 kw |
| X servomotor | 7 Kw |
| Y servomotor | 7 Kw |
| Z servomotor | 9 Kw |
| B servomotor | 4.2 Kw |
| C servomotor | 9.8 Kw |
| INSTALLATION REQUIREMENT | |
| Power required | 75 KVA |
| Air flow required | 100 L / min |
| TANK CAPACITY | |
| Coolant tank capacity | 120 L |
| Flush fluid tank | 380 L |
| MACHINE APSCE AND WEIGHT | |
| Floor space | 3,040 x 4,640 mm |
| Machine weight | 14,500 kg |
